Snmp Access Configuration - Avaya G450 Cli Reference Manual

Roadmap
Table 85: SLS survivability CLI commands (continued)
Root Level First level command
Commands

SNMP access configuration

Table 86: SNMP access configuration CLI commands
Root level command
ip snmp
set snmp community
set snmp retries
set snmp timeout
show snmp
show snmp engineID
show snmp group
show snmp retries
show snmp timeout
show snmp user
132 Avaya G450 CLI Reference
Second level command
set tac
set trunk-hunt
show (trunk-group)
Description
Enable or disable the SNMP agent for the G450
Create or modify an SNMPv1 community
Set the number of times to attempt to communicate with
a particular node
Specify the time to wait for a response before retrying
the communication
Display SNMP configuration information, including a list
of SNMP notification receivers
Display the SNMPv3 engine ID for the G450
Display a list of SNMPv3 groups
Display the number of retry attempts to make when
attempting to communicate with a node
Display the time to wait before resending a
communication
Display configuration information for a specified SNMP
user
Description
Administer the trunk-access
codes for SLS
Specify the trunk-hunting search
within a facility in an ISDN trunk
group or through a non-ISDN
digital trunk group in SLS
List all trunk-group SLS
parameters for this trunk-group
11 of 11
1 of 2