Calibration Movement Directions For All Axes - ABB IRB 365 Product Manual

6.4 Calibration movement directions for all axes

Overview
When calibrating, the axis must consistently be run towards the calibration position
in the same direction in order to avoid position errors caused by backlash in gears
and so on. Positive directions are shown in the graphic below.
Calibration service routines will handle the calibration movements automatically
and these might be different from the positive directions shown below.
Manual movement directions
xx2200000237
Pos
A
C
E
Product manual - IRB 365
3HAC079185-001 Revision: A
C
B
Description
Axis 1
Axis 3
Axis 5
© Copyright 2022 ABB. All rights reserved.
6 Calibration information
6.4 Calibration movement directions for all axes
E
+Z
D
Pos Description
B Axis 2
D Axis 4
A
+X
+Y
203