1.4.5.2 Calibration movement directions for all axes
Overview
When calibrating, the axis must consistently be run towards the calibration position
in the same direction in order to avoid position errors caused by backlash in gears
and so on. Positive directions are shown in the graphic below.
Calibration service routines will handle the calibration movements automatically
and these might be different from the positive directions shown below.
Manual movement directions
xx1800002456
Product specification - IRB 1090
3HAC088057-001 Revision: B
1.4.5.2 Calibration movement directions for all axes
© Copyright 2023 ABB. All rights reserved.
1 Description
29