Table of Contents
Advertisement
0B-18 MAINTENANCE AND LUBRICATION
REPLACEMENT
1) Inspect transmission case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level check.
3) Change fluid. For its procedure, refer to "CHANGING A/T
FLUID" in Section 7B.
1. Drain plug
TRANSFER OIL (4WD) AND REAR DIFFERENTIAL
OIL (4WD)
INSPECTION
1) Check transfer case or differential for evidence of oil leak-
age.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level check.
3) Remove level plug of transfer or differential and check oil
level.
Oil level can be checked roughly by means of level plug
hole. That is, if oil flows out of level plug hole or if oil level is
found up to hole when level plug is removed, oil is properly
filled.
If oil is found insufficient, pour specified amount of specified
oil referring to "TRANSFER OIL CHANGE" in Section 7D or
"DIFFERENTIAL OIL CHANGE" in Section 7F.
[A] : Transfer
[B] : Rear differential
1. Oil level/filler plug
2. Drain plug
4) Tighten level plug to specified torque referring to "TRANS-
FER OIL CHANGE" in Section 7D or "CHANGING DIFFER-
ENTIAL OIL" in Section 7F.
REPLACEMENT
Change transfer oil and differential oil with new specified oil refer-
ring to "TRANSFER OIL CHANGE" in Section 7D or "DIFFEREN-
TIAL OIL CHANGE" in Section 7F.
Advertisement
Table of Contents
