Table of Contents
Advertisement
M-series and MX-series Devices
446
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Services > Border
3.
Signaling Gateway.
Select Gateway.
4.
Add or modify settings as specified in Table 267 on page 446.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
NOTE: For devices running JUNOS Release 9.5 and later, new transaction
policy set settings will be available in the device editor only when the
policy-management mode is in-device mode. By default, new transaction
policy set settings can be created only in the Policy Manager and Object
Manager.
Table 267: Transaction Policy Set Configuration Details
Task
Configure a new transaction
policy set.
Define the new transaction
policies.
Configuring Timers (NSM Procedure)
You can configure timers used to issue SIP timeouts using the Sip option:
To configure timers in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Services > Border
3.
Signaling Gateway.
Your Action
1.
Click Add new entry next to Gateway.
2. Click Sip next to gateway.
3. In the Comment box, enter the comment.
4. Click New Transaction Policy Set next to Sip.
5. Click Add new entry next to New Transaction Policy Set.
6. In the Name box, enter the identifier for the new transaction
policy set.
7. In the Comment box, enter the comment.
1.
Click Policy Name next to new-transaction-policy-set.
2. Click Add new entry next to Policy Name.
3. In the New policy-name window, enter the names of one or
more new transaction policies that you want to add to the set.
Syntax: To specify a list of policies, enclose the policy names
in brackets.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
