Configuring Password; Table 343: Password Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 342: Class Configuration Details (continued)
Option
Allow Commands
Deny Commands
Allow Configuration
Deny Configuration
System > Login > Class > class > Allowed Days
New allowed-days
System > Login > Class > class > Permissions
New permissions

Configuring Password

Table 343: Password Configuration Details

Option Function
System > Login > Password
Comment Supplies a descriptive comment for the password.
Copyright © 2010, Juniper Networks, Inc.
Function
Specifies the regular expression for commands to
allow explicitly.
Specifies the regular expression for commands to
deny explicitly.
Specifies the regular expression for configuring the
class to allow explicitly.
Specifies the regular expression for configuring the
class to deny explicitly.
Specifies the day of the week that is allowed to
configure the class.
Specifies the permission required to configure the
class.
To configure password:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the password.
Click the Configuration tab. In the configuration tree, select System > Login >
3.
Password.
Add or modify settings as described in Table 343 on page 551
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the password settings.
Chapter 25: Configuring System
Your Action
Enter the allow commands.
Enter the deny commands.
Enter the allow configure commands.
Enter the deny configure commands.
Select a day of the week from the list.
Enter the permission.
Your Action
(Optional) Enter a comment.
551