Table of Contents
Advertisement
Configuring Bandwidth for the Reroute Path (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Select Mpls.
4.
Add or modify settings as specified in Table 144 on page 285.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 144: Administrative Groups Configuration Details
Task
Configure administrative
groups.
Define the administrative
groups to exclude for an LSP
or for a path's primary and
secondary paths.
Require the LSP to traverse
links that include all of the
defined administrative
groups.
Define the administrative
groups to include for an LSP
or for a path's primary and
secondary paths.
When configuring fast reroute, allocate bandwidth for the reroute path. By default, no
bandwidth is reserved for the rerouted path. The fast reroute bandwidth does not need
to be identical to that allocated for the LSP itself.
To configure bandwidth for the reroute path in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols.
3.
Select Mpls.
4.
Add or modify settings as specified in Table 145 on page 286.
5.
Click one:
6.
Your Action
1.
Click Admin Groups next to Mpls.
2. Click Add new entry next to Admin Groups.
3. In the Name box, enter the name of the group. You can assign
up to 32 names.
4. In the Comment box, enter the comment.
5. From the Group Value list, select the value assigned to the
group.
Range: 0 through 31
1.
Click Exclude next to Admin Group.
2. Click Add new entry next to Exclude.
3. In the New exclude window, enter the names of one or more
groups.
1.
Click Include All next to Admin Group.
2. Click Add new entry next to Include All.
3. In the New include-all window, enter the names of one or more
groups.
1.
Click Include Any next to Admin Group.
2. Click Add new entry next to Include Any.
3. In the New include-any window, enter the names of one or
more groups.
Chapter 20: Configuring Protocols
285
Advertisement
Table of Contents
