Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 303: Service Set Configuration Details
Task
Define the service set.
Configuring AACL rule and
AACL rule set.
Allow multicast traffic to be
sent to the Adaptive Services
or Multiservices PIC.
Specify the Class of Service
(CoS) service rule or rule set
included in this service.
Define JUNOS SDK service
set.
Your Action
1.
Click Add new entry next to Service Set.
2. In the Name box, enter the name that identifies the service set.
3. In the Comment box, enter the comment.
4. In the Max Flows box, enter the maximum number of flows.
5. From the Tcp Mss list, select the TCP Maximum Segment Size
(MSS) allowed for the service set.
Range: 536 to 65535
6. From the Application Identification Profile list, select the
application identification method.
7. From the Idp Profile list, select the Idp profile.
NOTE: The IDP profile is a list of IDP policies as defined in the
Security > Idp > Idp policy assigned to this device.
1.
Click Aacl Rules next to service-set.
2. Select one of the following:
aacl-rules—To specify the rule the router uses when applying
this service.
aacl-rule-set—To specify the rule set the router uses when
applying this service.
3. Click Add new entry.
4. From the Name list, select the identifier for the collection of
terms that constitute this rule set.
5. In the Comment box, enter the comment.
1.
Click Allow Multicast next to service-set.
2. In the Comment box, enter the comment.
1.
Click Cos Rules next to service-set.
2. Select one of the following:
cos-rules—To specify cos-rules.
cos-rule-set—To specify cos-rules set.
3. Click Add new entry.
4. From the Name list, select the rule or rule set name.
5. In the Comment box, enter the comment.
1.
Click Extension Service next to service-set.
2. Click Add new entry next to Extension Service.
3. In the Name box, enter the identifier for a provider-specific
service.
4. In the Comment box, enter the comment.
Chapter 23: Configuring Services
495
Advertisement
Table of Contents
