Table 36: Routing Engine Profile Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
80

Table 36: Routing Engine Profile Configuration Details

Task
Configure Routing Engine
profile.
Configure the statistics to
collect in an
accounting-data log file for
a Routing Engine.
Your Action
1. Click Add new entry next to Routing Engine Profile.
2. Expand routing-engine-profile.
3. In the Name box, enter the name of the Routing Engine statistics
profile.
4. In the Comment box, enter the comment for the routing engine
profile.
5. In the File box, enter the name of the log file.
6. From the Interval list, select the amount of time between each
collection of statistics.
Range: 1 through 2880 minutes
Default: 30 minutes
1. Click Fields next to routing-engine-profile.
2. In the Comment box, enter the comment.
3. Select the name of the field:
host-name—Hostname for the router.
date—Date, in yyyymmdd format.
time-of-day—Time of day, in hhmmsss format.
uptime—Time since last reboot, in seconds.
cpu-load-1—Average system load over the last 1 minute.
cpu-load-5—Average system load over the last 5 minutes.
cpu-load-15—Average system load over the last 15 minutes.
Memory Usage—Memory usage in bytes.
Total Cpu Usage—Amount of CPU time used.
Copyright © 2010, Juniper Networks, Inc.