Table of Contents
Advertisement
Configuring the Filter Profile (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Table 31: Log File Configuration Details
Task
Configure an
accounting-data log file.
Configure archive sites.
A filter profile specifies error and statistics information collected and written to a file. A
filter profile must specify counter names for which statistics are collected.
To configure the filter profile in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Accounting Options.
3.
Select Filter Profile.
4.
Add or modify the settings as specified in Table 32 on page 76.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Chapter 8: Configuring Accounting Options
Your Action
1.
Click Add new entry next to File.
2. In the Name box, enter the filename.
3. In the Comment box, enter the comment for the file.
4. In the Size box, enter the maximum size of each log file in the
range from 262144 through 1073741824 bytes.
5. From the Files list, select the maximum number of files.
Range: 1 through 1000
Default : 10
6. From the Transfer Interval list, select the time the file remains
open and receives new statistics before it is closed and
transferred to an archive site.
Range: 5 through 2880 minutes
Default: 30 minutes
7. In the Start Time box, enter the start time for transfer of an
accounting-data log file in the format yyyy-mm-dd.hh:mm
1.
Click Add new entry next to Archive Sites.
2. In the Name box, enter the site name.
3. In the Comment box, enter the comment.
4. In the Password box, enter the password.
75
Advertisement
Table of Contents
