Table of Contents
Advertisement
M-series and MX-series Devices
Configuring Virtual Interface (NSM Procedure)
492
Table 300: Traceoptions Configuration Details
Task
Configure PGCP trace
options.
You can configure a virtual interface for the BGF using the Virtual Interface option.
To configure virtual interface in NSM:
In the navigation tree select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
In the Configuration tab, expand Services > Pgcp.
3.
Select Virtual Interface.
4.
Add or modify the settings as specified in Table 301 on page 493.
5.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Your Action
1.
In the Comment box, enter the comment.
2. Select the No Remote Trace check box to disable remote
tracing.
3. Expand Traceoptions.
4. Click File next to Traceoptions.
5. In the Comment box, enter the comment.
6. In the Filename box, enter the name of the file to which the
tracing messages are written.
7. In the Size box, enter the size parameter (in bytes) to trigger
rotation of files.
8. From the Files list, select the number of trace files.
9. Select one of the following:
world-readable—To allow all users to use the log file.
no-world-readable—To disallow all users from using the log
file.
10. In the Match box, enter the regular expression.
11. Click Flag next to Traceoptions.
12. Click Add new entry next to Flag.
13. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
