Table of Contents
Advertisement
M-series and MX-series Devices
Table 216: Rib Group Fields
Option
Name
Comment
Export Rib
Import Policy
Import Rib
Configuring Source Routing (NSM Procedure)
384
Function
Specifies the unique name for the routing
table group.
Specifies the comment for the rorouting
table group.
Specifies the routing table from which
the JUNOS software exports routing
information.
Enables you to apply one or more
policies to routes imported into the
routing table group.
Specifies the name of the routing table
into which the JUNOS software is to
import routing information. The first
routing table name you enter is the
primary routing table. Any additional
names you enter identify secondary
routing tables. When a protocol imports
routes, it imports them into the primary
and any secondary routing tables.
You can configure source routing to specify IP addresses of the devices along the path,
that you want an IP packet to take on its way to its destination.
To configure source routing in NSM:
In the navigation tree, select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
Your Action
1.
Expand the
Routing Options
select
.
Rib Group
2. Click the New button or select a
routing table group and click the Edit
button.
3. Enter the name for the routing table
group.
1.
Expand the
Routing Options
select
Rib Group
.
2. Click the New button or select a
routing table group and click the Edit
button.
3. Enter the comment for the routing
table group.
1.
Expand the
Routing Options
select
.
Rib Group
2. Click the New button or select a
routing table group and click the Edit
button.
3. Enter the name of the routing table.
1.
Expand the
tree and select
rib-group
.
Import Policy
2. Set up the import policies for the
routing table group.
1.
Expand the
tree and select
rib-group
.
Import Policy
2. Enter the name of the routing table.
Copyright © 2010, Juniper Networks, Inc.
tree and
tree and
tree and
Advertisement
Table of Contents
