Table of Contents
Advertisement
Table 305: Captive Portal Configuration Details (continued)
Option
Secure Authentication
Configuring Custom Options (NSM Procedure)
Table 306: Custom Options Configuration Details
Option
Comment
Header Logo
Header Bgcolor
Header Message
Banner Message
Form Header Message
Copyright © 2010, Juniper Networks, Inc.
Function
Specifies either secure authentication (using encrypted
HTTPS) or nonsecure authentication (using plain-text
HTTP).
You can configure the following options with captive portal:
Configuring Custom Options (NSM Procedure) on page 501
Configuring the Interface (NSM Procedure) on page 502
Configuring Traceoptions (NSM Procedure) on page 503
This section provides information on configuring custom options for captive portal.
To configure custom options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the custom options feature.
Click the Configuration tab. In the configuration tree, select Services > Captive Portal
3.
> Custom Options.
Select the Enable Feature check box.
4.
Enter the parameters as specified in Table 306 on page 501.
5.
Click one:
6.
OK — Saves the changes.
Cancel — Cancels the modifications.
Apply—Applies the custom option parameters.
Function
Supplies a descriptive comment for the custom
option. This is optional.
Specifies the path for the header logo.
Specifies the header background color.
Specifies the header message.
Specifies the terms and conditions of usage message.
Specifies the login form header message.
Chapter 23: Configuring Services
Your Action
Select secure authentication from the
list.
Your Action
Enter a comment.
Enter the path with a file type of JPG,
JPEG, GIF, or PNG.
Enter the header color.
Enter a message.
Enter a message.
Enter a message.
501
Advertisement
Table of Contents
