Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 547

Table 316: Peer Configuration Details (continued)
Option
Comment
Peer > Ip Address > Spi
Name
Comment
Peer > Ip Address > Spi > Algorithm
Comment
none
hmac-md5
md5
Peer > Ip Address > Spi > Entity Type
Comment
none
host
mobility-agent
Peer > Ip Address > Spi > Key
Comment
Peer > Ip Address > Spi > Key > Hex
None
hex
ascii
Peer > Ip Address > Spi > Replay Method
Copyright © 2010, Juniper Networks, Inc.
Function
Supplies a descriptive comment for the IP address.
Specifies the Security Parameter Index (SPI) value.
Specifies the comment for the SPI value.
Specifies the comment for the algorithm.
Specifies that neither the hmac-md5 or md5 option
is specified for the algorithm.
Specifies hash algorithm that authenticates packet
data.
Produces a 128-bit digest.
Specifies the comment for the entity type.
Specifies that neither the host or the mobility-agent
entity type is enabled.
Enables the host entity type.
Enables the mobility-agent entity type.
Specifies the comment for the key.
Specifies that neither the HEX or ASCII key is
enabled.
Enables hexadecimal text key.
Enables ASCII text key.
Chapter 23: Configuring Services
Your Action
Enter a comment.
Enter th SPI value in hexadecimal format. For
example, 0–9, a-f, A-F.
Enter a comment.
Enter a comment.
Select the option.
Select the option.
Select the option.
Enter a comment,
Select the option.
Select the option.
Select the option.
Enter a comment.
Select the option.
1. Select the option.
2. Enter a comment and a hexadecimal
value.
1. Select the option.
2. Enter a comment and ASCII value.
511