Table of Contents
Advertisement
Table 60: Drop Profile Configuration Fields (continued)
Option
Comment
Related
Documentation
Configuring CoS Forwarding Classes (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Function
Specifies the comment for the fill level
Configuring CoS Classifiers (NSM Procedure) on page 124
Configuring CoS Code Point Aliases (NSM Procedure) on page 126
Configuring CoS Forwarding Classes (NSM Procedure) on page 129
Configuring CoS Interfaces (NSM Procedure) on page 134
Configuring CoS Rewrite Rules (NSM Procedure)
Configuring CoS Schedulers (NSM Procedure) on page 141
Configuring CoS and Applying Scheduler Maps (NSM Procedure) on page 143
Forwarding classes allow you to group packets for transmission. Based on forwarding
classes, you assign packets to output queues.
By default, four categories of forwarding classes are defined: best effort, assured
forwarding, expedited forwarding, and network control.
NOTE: EX-series switches support up to 16 forwarding classes.
To configure CoS forwarding classes:
In the navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure CoS forwarding classes.
Click the Configuration tab. In the configuration tree, expand Class of Service.
3.
Select Forwarding Classes.
4.
Add or modify settings as specified in Table 61 on page 130.
5.
Click one:
6.
OK—Saves the changes.
Chapter 13: Configuring Class of Service Features
Your Action
1.
On the Drop Profile interface click the
New button or select a profile and
click the Edit button.
2. Expand the Drop Profile tree and
select Fill Level.
3. Click the New button or select a fill
level and click the Edit button.
4. Enter a comment in the Comment
box.
129
Advertisement
Table of Contents
