Configuring Cos Schedulers (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Related
Documentation

Configuring CoS Schedulers (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Table 66: Routing Instances Configuration Details (continued)
Task
Specify a rewrite-rules
mapping for the traffic that
passes through all queues
on the interface.
Configuring CoS Classifiers (NSM Procedure) on page 124
Configuring CoS Forwarding Policy (NSM Procedure) on page 131
Configuring CoS Restricted Queues (NSM Procedure) on page 144
Configuring Tracing Operations (NSM Procedure) on page 145
Using schedulers, you can assign attributes to queues and thereby provide congestion
control for a particular class of traffic. These attributes include the amount of interface
bandwidth, memory buffer size, transmit rate, and schedule priority.
To configure CoS schedulers:
In the navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure CoS schedulers.
Click the Configuration tab. In the configuration tree expand Class of Service.
3.
Select Schedulers.
4.
Add or modify the settings as specified in Table 67 on page 142.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Network
and Security Manager Administration Guide for more information.
Chapter 13: Configuring Class of Service Features
Your Action
1. Click Rewrite Rules next to routing-instances.
2. In the Comment box, enter the comment.
4. Click Ieee 802.1 next to Rewrite Rules.
5. Select one of the following:
Ieee–802.1d—To apply an IEEE-802.1 rewrite rule
Ieee–802.1ad—To apply an IEEE-802.1ad rewrite rule
6. In the Comment box, enter the comment.
7. From the Rewrite Rule Name list, select the name of a
rewrite-rules mapping.
8. From the Vlan tag list, select the VLAN tag.
141