Table of Contents
Advertisement
Related
Documentation
Configuring Tracing Operations (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Cancel—Cancels the modifications.
Table 69: Restricted Queue Configuration Details
Task
Map forwarding classes to restricted queues.
Specify the name of the forwarding class and
queue number.
Configuring CoS Classifiers (NSM Procedure) on page 124
Configuring CoS Forwarding Policy (NSM Procedure) on page 131
Configuring CoS Translation Table (NSM Procedure) on page 147
Configuring Tracing Operations (NSM Procedure) on page 145
You can configure tracing operations using this option.
To configure tracing operations in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Class Of Service.
3.
Select Traceoptions.
4.
Add or modify settings as specified in Table 70 on page 145.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 70: Traceoptions Configuration Details
Task
Configure tracing
operations.
Chapter 13: Configuring Class of Service Features
Your Action
In the Comment box, enter the comment.
1.
In the Name box, enter the name of the
forwarding class.
2. In the Comment box, enter the comment
for the forwarding class.
3. From the Rqueue Num list, select the output
queue number.
Range: 0 through 3
Your Action
1.
In the Comment box, enter the comment for the traceoptions.
2. Select the No Remote Trace check box to disable remote
tracing globally or for a specific tracing operation.
145
Advertisement
Table of Contents
