Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 115: Ccc Family Configuration Details (continued)
Task
Apply a policer to an
interface.
Configuring Protocol Family (Inet) Information for the Logical Interface (NSM
Procedure)
To configure inet family information in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Interfaces.
3.
Select Interface.
4.
Add or modify settings as specified in Table 116 on page 220.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1.
Click Policer next to Filter.
2. In the Comment box, enter the comment.
3. In the Input box, enter the name of one policer to evaluate when
packets are received on the interface.
4. In the Output box, enter the name of one policer to evaluate
when packets are transmitted on the interface.
Chapter 17: Configuring Interfaces
219
Advertisement
Table of Contents
