Table of Contents
Advertisement
M-series and MX-series Devices
Table 334: Archival Configuration Details
Option
System > Archival > Configuration > Archive Sites
Name
Comment
Password
System > Archival > Configuration > Transfer Interval
transfer-interval
transfer-on-commit
Related
Documentation
Configuring ARP (NSM Procedure)
536
Add or modify settings as specified in Table 334 on page 536.
7.
Click one:
8.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the archival configuration settings.
Function
Specifies the URLs to receive the configuration files.
Supplies a descriptive comment for the archive site.
Specifies the password to login into the archive site.
Specifies (in minutes) the interval between data
transfers.
Configures the router to transfer its currently active
configuration to an archive site each time you commit
a candidate configuration.
Configuring Accounting (NSM Procedure) on page 531
Configuring ARP (NSM Procedure) on page 536
Configuring Auto Configuration (NSM Procedure) on page 537
The address resolution protocol (ARP) is a protocol that is used to identify the hardware
address of a network host. To configure ARP:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the ARP.
Click the Configuration tab. In the configuration tree, select System > Arp.
3.
Select Enable Feature to enable this feature.
4.
Add or modify settings as specified in Table 335 on page 537.
5.
Click one:
6.
OK—Saves the changes.
Your Action
Enter a flag name.
(Optional) Enter a comment.
Enter the password.
Set the transfer interval time. Range: 0 -
2880.
Select the transfer-on-commit check
box to enable this feature.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
