Table 205: Fate Sharing Fields - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 205: Fate Sharing Fields

Option
Comment
Group
Name
Comment
Copyright © 2010, Juniper Networks, Inc.
In the navigation tree, select
1.
In the list, double click the device to select it.
Devices
2.
Click the
3. Configuration
In the configuration tree, expand
4.
Select Fate Sharing .
5.
Add or modify the parameters as specified in Table 205 on page 365.
6.
Click one:
7.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Function
Specifies the comment for the fate
sharing.
Specifies the name of the fate sharing
group.
Specifies the comment for the fate
sharing group.
Device Manager > Devices
tab.
.
Routing Options
Your Action
Enter a comment.
1.
2. Click the New button or select a
3. Enter the group name.
1.
2. Click the New button or select a
3. Enter the comment.
Chapter 21: Configuring Routing Options
.
Expand the tree and
Fate Sharing
select .
Group
group and click the Edit button.
Expand the tree and
Fate Sharing
select .
Group
group and click the Edit button.
365