Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 116: Inet Family Configuration Details (continued)
Task
Your Action
Specify the
1.
Click Bandwidth Threshold next to interface.
bandwidth
2. Click Add new entry next to Bandwidth Threshold.
threshold for
3. In the Name box, enter the interface name.
VRRP.
4. In the Comment box, enter the comment.
5. From the Priority Cost list, select the VRRP router's priority cost for
becoming the master default router. The router with the highest priority
within the group becomes the master.
Range: 1 through 254
6. Click Route next to Track.
7. In the Route_address box, enter the address.
8. In the Routing Instances box, enter the routing instance in which the route
is to be tracked.
9. From the Priority Cost list, select the VRRP router's priority cost for
becoming the master default router. The router with the highest priority
within the group becomes the master.
10. Click Virtual Address next to vrrp-group.
11. Select one of the following:
virtual-address—To configure the addresses of the virtual routers in a
Virtual Router Redundancy Protocol (VRRP) IPv4 group. You can
configure up to eight addresses.
a. Click Add new entry and in the New virtual-address window, enter
b. In the New virtual-address window, enter the addresses of one or
virtual-inet6-address—To configure the addresses of the virtual routers
in a Virtual Router Redundancy Protocol (VRRP) IPv6 group. You can
configure up to eight addresses.
a. Click Add new entry
b. In the New virtual-address window, enter the addresses of one or
Configure input
1.
Click Input next to Filter.
filter.
2. Select one of the following:
input—To configure name of one filter to evaluate when packets are
received on the interface. Enter the input filter name.
input-list—To apply a group of filters to evaluate when packets are
received on an interface.
a. Click Add new entry next to input-list.
b. In the New input-list window, enter the filter names. Up to 16 filters
the addresses of one or more virtual routers.
more virtual routers.
more virtual routers.
can be included in a filter input list.
Chapter 17: Configuring Interfaces
223
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1