Table of Contents
Advertisement
M-series and MX-series Devices
Table 252: Interface Configuration Details (continued)
Option
Name
Comment
interface > Source Nat >
Pool
Low
High
Comment
interface > Source Nat >
Pool
Comment
interface > Source Nat >
Pool
None
pool-name
interface
interface > Static Nat
Name
Comment
Host
Virtual Router
Configuring a Proxy Address Resolution Protocol (NSM Procedure)
424
Function
Specifies the address prefix.
Supplies a descriptive comment for the address.
> pool > Address Range
Specifies the lower limit of the address range.
Specifies the upper limit of the address range.
Supplies a descriptive comment for the address
range.
> pool > Overflow Pool
Supplies a descriptive comment for the overflow
pool.
> pool > Overflow Pool > Pool Name
Specifies that neither the pool-name or the interface
options are enabled.
Specifies the overflow pool name.
Specifies the overflow pool interface.
Specifies the name of the static NAT.
Supplies a descriptive comment for the static NAT.
Specifies the host address.
Specifies the virtual router to search route to host
address.
To a configure proxy Address Resolution Protocol (ARP):
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure a proxy ARP.
Click the Configuration tab. In the configuration tree, select Security > Nat > Proxy
3.
Arp.
Your Action
Enter the address prefix.
(Optional) Enter a comment.
Enter the lower limit of the address range.
Enter the upper limit of the address range.
(Optional) Enter a comment.
(Optional) Enter a comment.
Select the option.
Select the option and enter the pool name.
Select the option.
Enter the mapped address.
(Optional) Enter a comment.
Enter the host address.
Select the virtual router from the list.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
