M-series and MX-series Devices
Configuring the L2TP Client (NSM Procedure)
60
Add or modify settings as specified in Table 17 on page 60.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 17: Authorization Order Configuration Details
Task
Configure the authorization
order.
To configure the Layer 2 Tunneling Protocol (L2TP) Client in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Access.
3.
Select Profile.
4.
Add or modify settings as specified in Table 18 on page 60.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 18: Client Configuration Details
Task
Configure the client.
Configure a client group.
Your Action
1.
Click Add new entry next to Profile.
2. Click Authorization Order next to Profile.
3. Click Add new entry next to Authorization Order.
4. In the New authorization-order window, select the authorization
order.
Your Action
1.
Click Add new entry next to Profile.
2. Click Client next to Profile.
3. Click Add new entry next to Client.
4. In the Name box, enter the client name.
5. In the Comment box, enter the comment.
6. In the Chap Secret box, enter the secret key associated with a
peer.
7. In the pap password box, enter the Password Authentication
Protocol (PAP) password.
1.
Click Client Group next to client.
2. Click Add new entry next to Client Group.
3. In the New client-group window, enter the client group.
Copyright © 2010, Juniper Networks, Inc.