Table of Contents
Advertisement
Configuring the Routing Engine Profile (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Add or modify the settings as specified in Table 35 on page 79.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 35: MIB Profile Configuration Details
Task
Configure mib profile.
Configure the name of the
MIB objects for which MIB
statistics are collected for
an accounting-data log file.
The Routing Engine profile collects Routing Engine statistics and logs them to a file. The
Routing Engine profile specifies the fields for which statistics are collected
To configure the Routing Engine profile in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Accounting Options.
3.
Select Routing Engine Profile.
4.
Add or modify the settings as specified in Table 36 on page 80.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Chapter 8: Configuring Accounting Options
Your Action
1.
Click Add new entry next to Mib Profile.
2. Expand mib-profile.
3. In the Name box, enter the name of the MIB statistics profile.
4. In the Comment box, enter the comment for the MIB profile.
5. In the File box, enter the name of the log file.
6. From the Interval list, select the amount of time between each
collection of statistics.
Range: 1 through 2880 minutes
Default: 30 minutes
7. From the Operation list, select the name of the operation to
use. You can select a get, get-next, or walk operation.
Default: walk
1.
Click Object Names next to mib-profile.
2. In the Name box, enter the name of a MIB object. You can
specify more than one MIB object name.
3. In the Comment box, enter the comment.
79
Advertisement
Table of Contents
