Configuring Dynamic Home Assignment (Nsm Procedure); Configuring The Home Agent (Nsm Procedure); Table 312: Dynamic Home Assignment Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Configuring Dynamic Home Assignment (NSM Procedure)

Table 312: Dynamic Home Assignment Configuration Details

Option Function
Name Specifies a name for the network address identifiers
(NAI).
Comment Supplies a descriptive comment for the NAI.
Home Agent Specifies the IP address of the home agent.

Configuring the Home Agent (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
This section provides information on configuring access dynamic home assignment for
Mobile IP.
To configure dynamic home assignment:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure dynamic home assignment.
Click the Configuration tab. In the configuration tree, select Services > Mobile Ip >
3.
Dynamic Home Assignment.
Enter a comment in the Dynamic Home Assignment workspace that describes the
4.
dynamic home assignment.
In the configuration tree, select Services > Mobile Ip > Dynamic Home Assignment
5.
> Home Agent.
Enter a comment in the Home Agent workspace that describes the home agent.
6.
In the configuration tree, select Services > Mobile Ip > Dynamic Home Assignment
7.
> Home Agent > Nai.
Add or modify settings as specified in Table 312 on page 507.
8.
Click one:
9.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the Nai options.
The home agent feature allows you to configure enable service, pool match order, and
virtual network.
Chapter 23: Configuring Services
Your Action
Enter a name in the following format:
@domain.com
user@domain.com
Enter a comment.
Enter the IP address.
507