Configuring Routing Options - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

CHAPTER 21

Configuring Routing Options

Copyright © 2010, Juniper Networks, Inc.
Configuring Confederation (NSM Procedure) on page 362
Configuring Dynamic Tunnels (NSM Procedure) on page 363
Configuring Fate Sharing (NSM Procedure) on page 364
Configuring Flow Route (NSM Procedure) on page 366
Configuring Forwarding Table (NSM Procedure) on page 368
Configuring Generated Routes (NSM Procedure) on page 369
Configuring Instance Export (NSM Procedure) on page 370
Configuring Instance Import (NSM Procedure) on page 371
Configuring Interface Routes (NSM Procedure) on page 372
Configuring Martian Addresses (NSM Procedure) on page 373
Configuring Maximum Paths (NSM Procedure) on page 374
Configuring Maximum Prefixes (NSM Procedure) on page 375
Configuring Multicast (NSM Procedure) on page 377
Configuring Options (NSM Procedure) on page 380
Configuring Routing Tables (NSM Procedure) on page 381
Configuring Routing Table Groups (NSM Procedure) on page 383
Configuring Source Routing (NSM Procedure) on page 384
Configuring Static Routes (NSM Procedure) on page 385
Configuring Topologies (NSM Procedure) on page 387
Configuring Traceoptions (NSM Procedure) on page 387
361