Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Select Label Switched Group.
4.
Add or modify settings as specified in Table 163 on page 309.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 163: Administrative Group Configuration Details
Task
Configure administrative
group.
Define the administrative
groups to exclude for an
LSP or for a path's
secondary paths.
Require the LSP to traverse
links that include all of the
defined administrative
groups.
Define the administrative
groups to include for an
LSP or for a path's primary
and secondary paths.
Configuring Class-Type Bandwidth Constraints for Multiclass LSPs (NSM Procedure)
You configure a multiclass LSP by using the Bandwidth option.
To configure bandwidth for the multiclass LSP in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols > Mpls.
3.
Select Label Switched Path.
4.
Add or modify settings as specified in Table 164 on page 310.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1.
Click Add new entry next to Label Switched Path.
2. Click Secondary next to label-switched-path.
3. Click Add new entry next to Secondary.
4. Click Admin Group next to secondary.
5. In the Comment box, enter the comment.
1.
Click Exclude next to Admin Group.
2. Click Add new entry next to Exclude.
3. In the New exclude window, enter the names of one or more
groups.
1.
Click Include All next to Admin Group.
2. Click Add new entry next to Include All.
3. In the New include-all window, enter the names of one or more
groups.
1.
Click Include Any next to Admin Group.
2. Click Add new entry next to Include Any.
3. In the New include-any window, enter the names of one or more
groups.
Chapter 20: Configuring Protocols
309
Advertisement
Table of Contents
