CHAPTER 16
Configuring Forwarding Options
Configuring Accounting Options (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Configuring Accounting Options (NSM Procedure) on page 185
Configuring the Extended DHCP Agent (NSM Procedure) on page 187
Specifying Address Family for Filters (NSM Procedure) on page 195
Configuring Load Balancing Using Hash Key (NSM Procedure) on page 196
Configuring Helpers (NSM Procedure) on page 197
Configuring Per-Flow and Per-Prefix Load Balancing (NSM Procedure) on page 205
Configuring Port Mirroring (NSM Procedure) on page 206
You can configure accounting for traffic passing through the router, containing a Monitoring
Services PIC or an Adaptive Services PIC. Configuring an accounting option includes
configuring the output flow aggregation and configuring the interface that sends out
monitored information.
To configure an accounting group in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Forwarding Options.
3.
Select Accounting.
4.
Add or modify the settings as specified in Table 90 on page 185.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 90: Accounting Options Configuration Details
Task
Configure an accounting
group.
Your Action
1.
Click Add new entry next to Accounting.
2. In the Name box, type the name of the accounting group.
185