Configuring Traceoptions (Nsm Procedure); Configuring A Vpn (Nsm Procedure); Table 242: Traceoptions Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Table 241: Policy Configuration Details (continued)
Option Function
Keys Defines the Diffies-Hellman group.
policy > Proposals
Proposals Specifies the members added as proposals.

Configuring Traceoptions (NSM Procedure)

Table 242: Traceoptions Configuration Details

Option
Name
Comment

Configuring a VPN (NSM Procedure)

410
To configure traceoptions:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the traceoptions.
Click the Configuration tab. In the configuration tree, select Security > Ipsec >
3.
Traceoptions.
Add or modify settings as specified in Table 242 on page 410.
4.
Enter a comment in the Traceoptions workspace that describes the traceoptions.
5.
In the Configuration tab. In the configuration tree, select Security > Ipsec >
6.
Traceoptions > Flag.
Click one:
7.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the traceoptions.
Function
Specifies the trace flag name.
Supplies a descriptive comment for the trace flag.
To configure a VPN:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure a VPN.
Click the Configuration tab. In the configuration tree, select Security > Ipsec > Vpn.
3.
Your Action
Select the perfect forward Secrecy key from
the list.
Select the proposals from the nonmembers
list. Then click Add to move them to the
members list.
Your Action
Select a name from the list.
Enter a comment.
Copyright © 2010, Juniper Networks, Inc.