Configuring Login (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 341: Location Details (continued)
Option Function
Building Specifies the building name.
Floor Specifies the floor of the building.
Rack Specifies the rack number.
Location > Lcc
Name Specifies the name for the LCC number.
Comment Supplies a descriptive comment for the LCC.
Floor Specifies the floor of the building.
Rack Specifies the rack number
Related
Documentation

Configuring Login (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Configuring an Inet6 Backup Router (NSM Procedure)
Configuring the Internet options (NSM Procedure) on page 545
Configuring a Name Server (NSM Procedure) on page 554
By default, no login message is displayed. A system login message appears before the
user logs in. A system login announcement appears after the user logs in.
To configure the login message:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the login message.
Click the Configuration tab. In the configuration tree, select System > Login.
3.
Enter a comment in the Login workspace that describes the system login.
4.
Enter an announcement in the Login workspace that describes the system
5.
announcement message.
Enter a message in the Login workspace that describes the system login message.
6.
Click one:
7.
OK—Saves the changes.
Cancel—Cancels the modifications.
Chapter 25: Configuring System
Your Action
Enter the building name.
Enter the floor of the building.
Enter the rack number.
Set a name for the LCC number. Range: 0 - 3.
(Optional) Enter a comment.
Enter the floor of the building.
Enter the rack number.
549