Configuring Access Profile (Nsm Procedure); Procedure); Configuring Radius Parameters For Aaa Subscriber Management; Table 13: Access Profile Properties Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Configuring Access Profile (NSM Procedure)

Configuring Accounting Parameters for Access Profiles (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Configuring RADIUS Parameters for AAA Subscriber Management (NSM
11.
Procedure) on page 65
Configuring the RADIUS Parameters (NSM Procedure) on page 68
12.
Configuring the RADIUS for Subscriber Access Management, L2TP, or PPP (NSM
13.
Procedure) on page 69
14. Configuring Session Limit (NSM Procedure) on page 69
To configure an access profile in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Access.
3.
Select Profile.
4.
Add or modify settings as specified in Table 13 on page 57.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 13: Access Profile Properties Configuration Details

Task
Configure access profile
properties.
To configure RADIUS accounting parameters for an access profile in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Access.
3.
Select Profile.
4.
Add or modify settings as specified in Table 14 on page 58.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1. Click Add new entry next to Profile.
2. In the Name box, enter the name of the profile.
3. In the Comment box, enter the comment.
Chapter 7: Configuring Access
57