M-series and MX-series Devices
Table 331: Configuring SNMP View Fields
Option
Name
Oid
Name
Include or Exclude
Related
Documentation
530
Select the Enable Feature check box.
6.
Enter the parameters as specified in Table 331 on page 530.
7.
Click one:
8.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the SNMP settings.
Function
Specifies a name for the view.
Specifies an OID used to represent a
subtree of MIB objects.
Specifies the MIB for the view.
Specifies whether the view includes or
excludes the set of MIB objects.
Configuring Basic System Identification for SNMP (NSM Procedure) on page 525
Configuring SNMP Communities (NSM Procedure) on page 526
Configuring SNMP Trap Groups (NSM Procedure) on page 528
Your Action
Enter a name for the view.
1.
Expand the View tree and select oid.
2. Click the New button or select an OID
and click the Edit button.
Enter the OID of the MIB in either
dotted-integer format or subtree-name
format.
Select exclude to exclude the subtree of
MIB objects represented by the specified
OID.
Select include to include the subtree of
MIB objects represented by the specified
OID.
Copyright © 2010, Juniper Networks, Inc.