Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 130

M-series and MX-series Devices
94
Table 43: Igmp Snooping Configuration Details (continued)
Task
Configure IGMP tracing
options.
Your Action
1. In the Comment box, enter the comment for the traceoptions.
2. Click File next to Traceoptions.
3. In the Comment box, enter the comment for the filename.
4. In the Filename box, enter the name of the file to receive the
output of the tracing operation.
5. In the Size box, enter the maximum trace file size in bytes.
Range : 10240 to 4294967295
6. From the Files list, select the maximum number of trace files.
Range: 2 through 1000 files
Default: 2 files
7. Select one of the following:
no-world-readable—To restrict the file access to owner.
world-readable—To enable unrestricted access.
8. Click Flag next to Traceoptions.
9. Click Add new entry next to Flag.
10. From the Name list, select the flag to perform the trace
operation.
11. In the Comment box, enter the comment for the flag.
12. Select the corresponding flag modifier check box.
Copyright © 2010, Juniper Networks, Inc.