Table of Contents
Advertisement
M-series and MX-series Devices
240
Table 124: Multicast Snooping Options Configuration Details
Task
Establish a list of flood
group addresses for
multicast snooping.
Configure multicast
forwarding cache properties.
Establish the graceful
restart duration for
multicast snooping.
Establish multicast
snooping option values.
Your Action
1.
Click Flood Groups next to Multicast Snooping Options.
2. Click Add new entry next to Flood Groups.
3. In the dialog box, enter the IP addresses.
1.
Click Forwarding Cache next to Multicast Snooping Options.
2. In the Comment box, enter the comments.
3. Expand Forwarding Cache.
4. Click Threshold next to Forwarding Cache.
5. In the Comment box, enter the comments.
6. From the Suppress list, select the threshold value for a
forwarding cache.
Range: 1 through 200,000
7. From the Reuse list, select the reuse value for the threshold.
The reuse value must be less than the suppression threshold
value.
Range: 1 through 200,000
1.
Click Graceful Restart next to Multicast Snooping Options.
2. In the Comment box, enter the comments.
3. From the Restart Duration list, select the duration for graceful
restart.
Range: 0 to 300 seconds
Default : 180 seconds
1.
Click Option next to Multicast Snooping Options.
2. In the Comment box, enter the comments.
3. Expand Options.
4. Click Syslog next to Options.
5. In the Comment box, enter the comments.
6. From the Upto list, select select the level upto which severity
the messages to be syslogged.
7. From the Mark list, select the time interval in seconds to mark
the trace file.
Range : -2147483647 seconds to 2147483647 Seconds
Default : 0
8. Expand Syslog.
9. Click Level next to Syslog.
10. Select the Level of severity to be logged.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
