Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 8: Address Assignment Configuration Details (continued)
Task
Specify user-defined options
that are added to client
packets.
Specify a list of match criteria
used to determine which
named address range in the
address-assignment pool to
use.
Specify one or more routers
located on the client's
subnet.
Specify SIP Servers list of
IPv6 addresses available to
the client.
Specify one or more NetBIOS
name servers (NBNS) that
the client uses to resolve
NetBIOS names.
Your Action
1.
Click Option next to Dhcp Attributes.
2. Click Add new entry next to Option.
3. From the Name list, select the ID number to be used to index
the option.
4. In the Comment box, enter the comment.
5. Click Flag next to option.
6. From the Flag list, select the flag type.
1.
Click Option Match next to Dhcp Attributes.
2. In the Comment box, enter the comment.
3. Click Option 82 next to Option Match.
4. In the Comment box, enter the comment.
5. Click Circuit Id next to Option 82.
6. Click Add new entry next to Circuit Id.
7. In the Name box, enter the name of the address-assignment
pool range to be used.
8. In the Comment box, enter the comment.
9. In the Range box, enter the range.
10. Click Remote Id next to Option 82.
11. Click Add new entry next to Remote Id.
12. In the Name box, enter the name of the address-assignment
pool range to be used.
13. In the Comment box, enter the comment.
14. In the Range box, enter the range.
1.
Click Router next to Dhcp Attributes.
2. Click Add new entry next to Router.
3. In the Name box, enter the name of the router.
4. In the Comment box, enter the comment.
1.
Click Sip Server Address next to Dhcp Attributes.
2. Click Add new entry next to Sip Server Address.
3. In the Name box, enter the SIP Servers list of IPv6 addresses
available to the client.
4. In the Comment box, enter the comment.
1.
Click Wins Server next to Dhcp Attributes.
2. Click Add new entry next to Wins Server.
3. In the Name box, enter the IP address of each NetBIOS name
server.
4. In the Comment box, enter the comment.
Chapter 7: Configuring Access
51
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1