Creating A Remote Template Account; Table 56: Remote Template Account Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices

Creating a Remote Template Account

120
the CLI username is the login name, and the privileges, file ownership, and effective user
ID are inherited from the template account.
To configure template accounts, follow these procedures:
Creating a Remote Template Account on page 120
Creating a Local Template Account on page 121
You can create a remote template that is applied to users authenticated by RADIUS or
TACACS+ that do not belong to a local template account.
By default, JUNOS software with enhanced services uses the remote template account
when:
The authenticated user does not exist locally on the Services Router.
The authenticated user's record in the RADIUS or TACACS+ server specifies local user,
or the specified local user does not exist locally on the device.
The following procedure creates a sample user named remote that belongs to the operator
login class.
To create a remote template account:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab and then double-click the device for which you want to
2.
create a remote template account.
Click the Configuration tab. In the configuration tree, select System > Login > User.
3.
Add or modify login class settings as specified in Table 56 on page 120.
4.
Click one:
5.
New—Creates a new remote template account.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 56: Remote Template Account Details

Option Function
Name Specifies a name for the user name.
Uid Specifies the user identifier for a
login account.
Class Specifies the login class for the user.
Your Action
Enter the user name. For example, type
remote.
Enter the number associated with the
login account.
Select the login class. For example, select
operator.
Copyright © 2010, Juniper Networks, Inc.