Configuring The Local Certificate (Nsm Procedure); Configuring Firewall Authentication (Nsm Procedure); Table 224: Local Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Table 223: Certification Authority Configuration Details (continued)
Option Function
Ldap Url Specifies the LDAP URL.
Encoding Specifies the encoding to be used for the certificate or
CRL on disk.

Configuring the Local Certificate (NSM Procedure)

Table 224: Local Configuration Details

Option Function
Name Specifies the name of the certificate.
Comment Supplies a descriptive comment for the certificate.
Certificate Specifies the certificate and the private key.
Related
Documentation

Configuring Firewall Authentication (NSM Procedure)

392
To configure the local certificate feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the local certificate feature.
Click the Configuration tab. In the configuration tree, select Security > Certificates
3.
> Local.
Add or modify settings as specified in Table 224 on page 392.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the local settings.
Configuring the Firewall Authentication (NSM Procedure) on page 392
Configuring a Flow (NSM Procedure) on page 393
Configuring the Forwarding Options (NSM Procedure) on page 400
To configure firewall authentication feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the firewall authentication feature.
Your Action
Enter the LDAP URL.
Select the encoding type from the list.
Your Action
Enter a name.
(Optional) Enter a comment.
Enter a private key for the certificate.
Copyright © 2010, Juniper Networks, Inc.