Configuring The Access Profile (Nsm Procedure); Table 28: Securid Server Configuration Details; Table 29: Access Profile Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Related
Documentation

Configuring the Access Profile (NSM Procedure)

Table 29: Access Profile Configuration Details

Task
Configuring the access profile.
Related
Documentation
72

Table 28: SecurID Server Configuration Details

Task
Configure the SecurID
server.
Configuring the RADIUS for Subscriber Access Management, L2TP, or PPP (NSM
Procedure) on page 70
To configure the access profile in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, select Access Profile.
3.
Add or modify settings as specified in Table 29 on page 72.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1. In the Comment box, enter the comment.
2. In the Name box, enter the name of the access profile.
Configuring Access Profiles for L2TP or PPP Parameters (NSM Procedure) on page 56
Configuring the RADIUS Parameters (NSM Procedure) on page 68
Your Action
1. Click Add new entry next to Securid Server
2. In the Name box, enter the name of the SecurID server.
3. In the Comment box, enter the comment.
4. In the Configuration File box, enter the path to the SecurID
server configuration (sdconf.rec) file.
Copyright © 2010, Juniper Networks, Inc.