Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Event Options.
3.
Select Policy.
4.
Add or modify settings as specified in Table 76 on page 157.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 76: Configure Event Policy Details
Task
Define an event policy to be
processed by the event
process (eventd) process.
Execute the policy only if the
attributes of two events are
correlated or if the attribute
of one event matches a
regular expression.
Create a list of events that
trigger this policy. If one or
more of the listed events
occurs, the policy is executed.
Define actions to take if an
event occurs. For each policy,
you can configure multiple
actions.
Your Action
1.
Click Add new entry next to Policy.
2. In the Name box, enter the policy name.
3. In the Comment box, enter the comment for the policy.
1.
Click Add new entry next to Attributes Match.
2. In the From Event Attribute box, enter the first attribute to
compare.
3. From the Condition list, select the match condition for the
attributes.
4. In the To Event Attribute Value box, enter another attribute.
5. In the Comment box, enter the comment for the
attributes-match.
1.
Click Add new entry next to Events.
2. In the New events dialog box, enter the name of the event.
1.
Click Then next to policy.
2. In the comment box, enter the comment.
3. Select the Ignore check box to define a policy that ignores
particular events.
4. Select the Raise Trap check box to define a policy that raises
a Simple Network Management Protocol (SNMP) trap in
response to an event.
Chapter 14: Configuring Event Options
157
Advertisement
Table of Contents
