M-series and MX-series Devices
Table 327: Traceoptions Configuration Details
Option
Name
Comment
524
Click the Configuration tab. In the configuration tree, select Services > Unified Access
3.
Control > Traceoptions.
In the Traceoptions workspace, enter a comment for the traceoptions.
4.
In the configuration tree, select Services > Unified Access Control > Traceoptions >
5.
Flag.
Add or modify settings as specified in Table 327 on page 524.
6.
Click one:
7.
OK—Saves the changes.
Cancel—Cancels the modifications.
Function
Specifies the flag name.
Specifies the comment for the flag.
Your Action
Select a name.
Enter a comment.
Copyright © 2010, Juniper Networks, Inc.