Configuring Accounting Options; Configuring Accounting Options (Nsm Procedure); Configuring Class Usage Profiles (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

CHAPTER 8

Configuring Accounting Options

Configuring Accounting Options (NSM Procedure)

Configuring Class Usage Profiles (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Configuring Accounting Options (NSM Procedure) on page 73
An accounting profile represents common characteristics of collected accounting data.
You can configure multiple accounting profiles using this option. See the following topics:
Configuring Class Usage Profiles (NSM Procedure) on page 73
Configuring a Log File (NSM Procedure) on page 74
Configuring the Filter Profile (NSM Procedure) on page 75
Configuring the Interface Profile (NSM Procedure) on page 76
Configuring the Policy Decision Statistics Profile (NSM Procedure) on page 77
Configuring the MIB Profile (NSM Procedure) on page 78
Configuring the Routing Engine Profile (NSM Procedure) on page 79
You can configure the class usage profile to collect statistics for particular source and
destination classes.
To configure class usage profiles in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Accounting Options.
3.
Select Class Usage Profile.
4.
Add or modify the settings as specified in Table 30 on page 74.
5.
Click one:
6.
OK-Saves the changes.
Cancel-Cancels the modifications.
73