Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 441

Network and security manager
Table of Contents

Advertisement

Table 236: Policy Configuration Details (continued)
Option
Policy > Certificate
Comment
Local Certificate
Peer Certificate Type
Policy > Certificate > Trusted Ca
Comment
Policy > Certificate > Trusted Ca > Ca index
None
ca-index
use-all
Policy > Pre Shared Key
Comment
Policy > Pre Shared Key > Ascii Text
None
ascii-text
hexadecimal
Policy > Proposals
Proposals
Copyright © 2010, Juniper Networks, Inc.
Function
Supplies a descriptive comment for the certificate.
Specifies the local certificate identifier.
Specifies the preferred type of certificate from peer.
Supplies a descriptive comment for the trusted
certification authority.
Specifies that neither the ca-index nor use all option
is enabled.
Specifies the preferred certificate authority ID for
the device to use.
Specifies that the device uses all configured CAs.
Supplies a descriptive comment for the preshared
key.
Specifies that neither the ascii-text nor
hexadecimal key is enabled.
Enables the ASCII text key.
Enables the hexadecimal text key.
Specifies the members added as proposals.
Chapter 22: Configuring Security
Your Action
(Optional) Enter a comment.
Enter the local certificate identifier.
Select the certificate type from the list.
(Optional) Enter a comment.
Select the option.
Select the option and set the certificate
authority ID. Range: 0 - 4294967295.
Select the option.
(Optional) Enter a comment.
Select the option.
Select the option and enter the ASCII text key.
Select the option and enter the hexadecimal
text key.
Select the proposals from the nonmembers
list. Then click Add to move them to the
members list.
405

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-seriesMx-series

Table of Contents