Table of Contents
Advertisement
M-series and MX-series Devices
Table 208: Generated Routes Fields
Option
Comment
Defaults
Route
Configuring Instance Export (NSM Procedure)
370
In the navigation tree, select
1.
In the
list, double click the device to select it.
Devices
2.
Click the
3.
Configuration
In the configuration tree, expand
4.
Select
Generate
.
5.
Add or modify the parameters as specified in Table 208 on page 370.
6.
Click one:
7.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Function
Specifies the comment for the generated
route.
Enables you to specify globally
generated route options. These are
treated as global defaults and apply to
all the generated routes you configure.
Enables you to configure individually
generated routes. You can also configure
globally generated route options. These
options apply to the individual
destination only and override any options
you configured in Defaults.
Current configurations that use routing table groups define a policy to select routes in
an IGP export policy. However, no policy controls the export process itself. You can
configure the instance export policy to control the export process. The policy model
supports both interinstance route export and IGP export.
To configure an instance export policy in NSM:
Device Manager > Devices
tab.
.
Routing Options
Your Action
Enter a comment.
1.
2. Configure the default route options.
1.
2. Configure the individual route
.
Expand the
Generate
tree and select
Defaults
.
Expand the
tree and select
Generate
.
Route
options.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
