Related
Documentation
Configuring PIC Console Authentication (NSM Procedure)
Related
Documentation
Configuring Ports (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Configuring a Login (NSM Procedure) on page 549
Configuring a Location (NSM Procedure) on page 548
Configuring the Internet options (NSM Procedure) on page 545
You can configure console access to Physical Interface Cards (PICs).
To configure a PIC console authentication:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab. Then double-click the device for which you want to configure
2.
the PIC console authentication.
Click the Configuration tab. In the configuration tree, select System > Pic Console
3.
Authentication.
Enter a plain text password in the PIC Console Authentication workspace.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the PIC console authentication settings.
Configuring a Name Server (NSM Procedure) on page 554
Configuring a Login (NSM Procedure) on page 549
Configuring a Location (NSM Procedure) on page 548
The router's craft interface has two ports for connecting terminals to the router such as
auxiliary and console ports.
To configure ports:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab. Then double-click the device for which you want to configure
2.
the ports.
Click the Configuration tab. In the configuration tree, select System > Ports.
3.
Enter a comment in the Ports workspace that describes the ports.
4.
Add or modify the settings as specified in Table 346 on page 556.
5.
Click one:
6.
Chapter 25: Configuring System
555