Table of Contents
Advertisement
Configuring the LDAP Server (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Table 20: Ldap Options Configuration Details (continued)
Task
Derive user distinguished
name from common-name
and
base-distinguished-name.
To configure Lightweight Directory Access Protocol (LDAP) server in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Access.
3.
Select Profile.
4.
Add or modify settings as specified in Table 21 on page 64.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1.
Click Assemble next to Ldap Options.
2. Select one of the following:
assemble—To derive user distinguished name from
common-name and base-distinguished-name.
a. In the Comment box, enter the comment.
b. In the Common Name box, enter the common name.
search—To search for user's distinguished name.
a. In the Comment box, enter the comment.
b. In the Search Filter box, enter the filter to use in search.
c. Click Admin Search next to Search.
d. In the Comment box, enter the comment.
e. In the Distinguished Name box, enter the user
distinguished name.
f.
In the Password box, enter the password.
Chapter 7: Configuring Access
63
Advertisement
Table of Contents
