Table of Contents
Advertisement
Copyright © 2010, Juniper Networks, Inc.
Table 188: Group Configuration Details (continued)
Task
Apply a policy or list of
policies to routes being
exported to the neighbors.
Apply one or more policies
to routes being imported into
the local routing device from
the neighbors.
Applying Policies to Routes Exported by RIPng (NSM Procedure)
By default, RIPng does not export routes it has learned to its neighbors. To have RIPng
export routes, apply one or more export policies. To apply export policies and to filter
routes being exported from the local routing device to its neighbors use the Export option.
To apply for export policies for RIPng in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols.
3.
Select Ripng.
4.
Add or modify settings as specified in Table 189 on page 342.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1.
Click Export next to Group.
2. Use the following options to select the policies to export:
Click Add after selecting a policy member from the Non
member list to add it to the Members list.
Click Remove after selecting a policy from the Members list
to remove it from the Members list.
Click Add All to add all the Non members to the Members
list.
Click Remove All to remove all the members from the
Members list.
1.
Click Import next to Group.
2. Use the following options to select the policies to import:
Click Add after selecting a policy member from the Non
member list to add it to the Members list.
Click Remove after selecting a policy from the Members list
to remove it from the Members list.
Click Add All to add all the Non members to the Members
list.
Click Remove All to remove all the members from the
Members list.
Chapter 20: Configuring Protocols
341
Advertisement
Table of Contents
