Table of Contents
Advertisement
M-series and MX-series Devices
Configuring VLAN ID (NSM Procedure)
96
Table 43: Igmp Snooping Configuration Details (continued)
Task
Configure interface specific
properties.
You can configure VLAN IDs using the Vlan Id option.
To configure VLAN ID in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Bridge Domains.
3.
Select Domain.
4.
Add or modify settings as specified in Table 44 on page 97.
5.
Click one:
6.
Your Action
1.
Click Interface next to vlan.
2. Click Add new entry next to Interface.
3. In the Name box, enter the interface name.
4. In the Comment box, enter the comment.
5. Select the Multicast Router Interface check box if the interface
is a multicast router interface.
6. Select the Immediate Leave check box to enable immediate
group leave on a router.
7. Select the Host Only Interface check box if the interface is to
be configured as a host-facing interface.
8. From the Group Limit list, select the limit for the number of
multicast groups (or [S,G] channels in IGMPv3) allowed on an
interface.
After this limit is reached, new reports will be ignored and all
related flows are not flooded on the interface.
9. Click Static next to interface.
10. In the Comment box, enter the comment.
11. Expand Static.
12. Click Group next to Static.
13. Click Add new entry next to Group.
14. In the Name box, enter the IGMP multicast group address.
15. In the Comment box, enter the comment.
16. Click Source next to group.
17. Click Add new entry next to Source.
18. In the Name box, enter the IP version 4 (IPv4) unicast source
address for the multicast group being statically configured on
an interface.
19. In the Comment box, enter the comment.
20. Click Proxy next to vlan.
21. In the Comment box, enter the comment.
22. In the Source Address box, enter the IP address to use as the
source for IGMP snooping reports in proxy mode.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
