Tracking Updated Devices Using Job Manager - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Related
Documentation

Tracking Updated Devices Using Job Manager

34
Name of the command
Date and time the command was sent
Completion status for each device that received the command
Detailed description of command progress
Command output, such as a configuration list or command-line interface (CLI) changes
on the device
NOTE: Job Manager configuration summaries and job information details
do not display passwords in the list of CLI commands for administrators
that do not have the assigned activity "View Device Passwords." By default,
only the super administrator has this assigned activity.
About Updating M-series and MX-series Devices on page 31
How the Update Process Works on page 32
Tracking Updated Devices Using Job Manager on page 34
Reviewing Job Information Displayed in Job Manager on page 35
Device States Displayed in Job Manager During Update on page 36
Understanding Updating Errors Displayed in the Job Manager on page 37
Use Job Manager to track device updates in real time. You can view the status of a running
update and the status of completed updates in the Job Manager module.
When you send a command to a device or group of devices using NSM, the management
system creates a job for that command and displays information about that job in the
Job Information dialog box. The command you send is called a directive.
Job Manager includes the following utilities and information:
View Controls—Use View controls to set the information level you want displayed in
Job Manager:
Expand All displays all devices associated with a directive type.
Collapse All displays the directive type.
Job Type (Directive) List—Displays the job type (directives) and associated timestamp
completion status information. All current and completed jobs appear, including device
updates. However, if you have not yet performed an update using NSM, the Job List
does not display an Update Configuration directive.
Copyright © 2010, Juniper Networks, Inc.