Configuring Instance Import (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Configuring Instance Import (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
In the navigation tree, select
1.
In the list, double click the device to select it.
Devices
2.
Click the
3. Configuration
In the configuration tree, expand
4.
Select Instance Export and specify the export policies for routes being exported from
5.
a routing instance.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
You can apply one or more policies to routes being imported into a routing instance.
To configure instance import in NSM:
In the navigation tree, select
1.
In the Devices list, double click the device to select it.
2.
Click the
3. Configuration
In the configuration tree, expand
4.
Select and specify the import policies to be applied to the routes that
5. Instance Import
are imported to a routing instance.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
Device Manager > Devices
tab.
.
Routing Options
Device Manager > Devices
tab.
Routing Options .
Chapter 21: Configuring Routing Options
.
.
371