Table of Contents
Advertisement
M-series and MX-series Devices
Configuring Group (NSM Procedure)
188
Table 91: Authentication Configuration Details
Task
Configure the password.
Configure the username.
You can specify the name of a group of interfaces that have a common DHCP relay agent
configuration. A group must contain at least one interface.
To configure group of interfaces:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Forwarding Options >
3.
DHCP Relay.
Select Group.
4.
Your Action
1.
Expand Authentication.
2. In the Comment box, enter the comment for authentication.
3. In the Password box, enter the password to be sent to the
external AAA authentication server for subscriber
authentication.
1.
Click Username Include next to Authentication.
2. In the Comment box, enter the comment.
3. In the Delimiter box, enter the character used as the delimiter
between the concatenated components of the username.
You cannot use the semicolon (;) as a delimiter.
4. In the Domain Name box, enter the domain name that is
concatenated with the username during the subscriber
authentication process.
5. In the User prefix box, enter the user prefix concatenated with
the username during the subscriber authentication process.
Select Mac Address check box if the MAC address from
the client PDU be concatenated with the username during
the subscriber authentication process.
Select Logical System Name check box if the logical system
name be concatenated with the username during the
subscriber authentication process.
Select Routing Instance Name check box if the routing
instance name be concatenated with the username during
the subscriber authentication process.
Select Option 60 check box if the payload of the Option
60 (Vendor Class Identifier) from the client PDU be
concatenated with the username during the subscriber
authentication process.
Select Circuit Type check box if the circuit type be
concatenated with the username during the subscriber
authentication process.
6. Click Option 82 next to Username Include.
7. Select the Circuit-id or remote id check box to select the string
for the agent circuit ID suboption.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
